Three hundred linear feet is a large residential fence project and may cover a full perimeter, a large corner lot, or a substantial backyard. In 2026, a practical national planning range is roughly $4,500 to $18,000+ depending on material, height, gates, terrain, and access.
Use our fence installation cost calculator to adjust the estimate for material, length, height, and complexity.
300 Linear Feet Fence Cost by Material
| Material | Planning Range | Typical Use |
|---|---|---|
| Chain link | $4,500–$9,000 | Budget perimeter, pets, utility areas |
| Wood privacy | $7,500–$16,500 | Backyards, privacy, cedar or treated lumber |
| Vinyl | $9,000–$18,000 | Low-maintenance privacy or decorative fencing |
| Aluminum | $9,000–$15,000 | Decorative boundaries, pools, open views |
300 Feet vs. 200 Feet
Adding another 100 linear feet makes material choice much more important because every per-foot difference is multiplied across the full run. Compare our 200 linear feet fence cost guide before finalizing a perimeter.
Example Budget
At $30 per linear foot installed, 300 feet costs about $9,000. At $45 per foot, the same project reaches $13,500. A large driveway gate, demolition, rocky soil, or premium materials can push the total higher.
Why Large Fence Projects Need Careful Layout
At 300 feet, a small measurement error can change the material order significantly. Confirm the legal property line, gate locations, setbacks, easements, and utility markings before installation. On large lots, mixed-material layouts can control cost—for example, premium fencing where visible from the street and a simpler material along less visible sides.
Major Cost Drivers
- Fence material and height
- Post spacing and depth
- Rocky, root-heavy, or sloped terrain
- Walk gates and double drive gates
- Old fence demolition and hauling
- Survey or property-line work
- Permit or HOA requirements
- Staining or painting wood
Gate Costs Matter More Than People Expect
A simple walk gate adds relatively little compared with a large double gate or driveway gate. Wider openings need stronger posts, heavier hardware, and more precise alignment. Decide the required access width before the fence layout is finalized.
Fence Quote Checklist
For a 300-foot project, small scope differences create large price differences. Compare proposals using the exact fence length, height, material grade, post size and spacing, gate dimensions, demolition, disposal, staining or finishing, and any allowance for difficult digging.
- Confirm the measured linear footage and property line.
- Specify fence height and exact material or product line.
- List every walk gate and driveway gate with widths.
- Confirm post depth, concrete, and handling of slopes.
- Ask whether old-fence removal and hauling are included.
- Confirm permit, HOA, and utility-marking responsibilities.
FAQ
How much does a 300-foot privacy fence cost?
Wood privacy fencing may land around $7,500 to $16,500, while vinyl can fall around $9,000 to $18,000 depending on material, height, gates, and labor.
How long does 300 feet of fence take to install?
Timing depends on crew size, terrain, post-hole conditions, curing, gates, and removal work. A simple project may take several days, while difficult sites take longer.
Should I get a survey first?
If the boundary is uncertain, confirming it before installation can prevent a costly relocation or dispute.
How 300 Linear Feet Changes the Project
At 300 linear feet, small choices have a large effect on the total because every dollar of installed cost per foot is multiplied across a long run. A $5-per-foot difference equals $1,500 over 300 feet, so material grade, fence height, post spacing and gate count deserve careful comparison.
Break the Fence Into Sections
Before requesting bids, sketch each side of the property and note corners, gates, slopes and changes in grade. Long straight runs are generally easier to install than sections that step down hills, curve around landscaping or require hand digging near structures. Ask contractors to identify which areas are priced as standard work and which carry extra labor.
What a Detailed Bid Should Include
- Total measured linear footage and fence height.
- Material species or product line.
- Post dimensions, spacing and footing method.
- Gate quantity, width and hardware.
- Removal and disposal of the existing fence.
- Staining, sealing or painting if required.
- Permit, survey and utility-marking responsibilities.
For a project this long, compare written scopes carefully and ask how changes are priced if difficult soil, roots or boundary issues are discovered. The calculator gives a planning range; the final contract should define the actual installation details.
Sources: BuildItCalc — 2026 Fence Pricing Guide and HomeGuide — Fence Installation Cost.